Skip to content
theFace

In-house sign production in Kyiv since 1996

TheFace is a full-cycle outdoor-advertising manufacturer with its own workshop in Kyiv. We design, build and install signs with our own crew across Ukraine — from sketch to a lit facade.

TheFace’s workshop at 29 Olzhycha St in Kyiv: sign blanks on the bench, a mitre saw and daylight from the windows
  • Design, production, installation and service — one contractor, no subcontracting
  • Sign rules checked before we build: in Kyiv there is no permit and nothing to file; in other cities we prepare and file the paperwork ourselves
  • One-year warranty, and servicing after it

Our story

We’ve been making signs since 1996. Back then there were no CNC routers, no composite panels, no flexible neon, and clients preferred to pay cash, in dollars.

A few decades in, one thing is clear. What we’ve held onto is, on one side, the experience and the knack for turning a project around on the tightest deadline; on the other, technologists and design engineers who have worked out more than a few genuinely offbeat client requests over the years.

We also have a feeling that the three technologies running the sign market today — composite panels, dimensional letters and cold neon — will stay relevant for another 10–15 years.

Maybe that’s why about 90% of what we make falls into exactly those three.

In 2023–2025 we handed over 50–70 wildly different jobs a year, in Ukraine and abroad, and we’re sure the sign industry, in the classic sense, hasn’t said its last word.

New ideas keep coming, new materials, new technology. A new fashion sets in, a new style takes shape. And our company, happily, is part of it.

Our workshop

Our own workshop at 29 Olzhycha St in Kyiv: metal, acrylic, composite, LED. The crew that builds the sign is the crew that installs it.

TheFace’s workshop at 29 Olzhycha St in Kyiv: sign blanks on the bench, a mitre saw and daylight from the windows
A TheFace craftsman welding a steel sign frame at the bench in the workshop
A TheFace craftsman laying out flexible LED neon on an acrylic panel at the workbench
A TheFace installer on a stepladder wiring the illuminated sign above a fitness-club pool entrance
A TheFace craftsman assembling a large pink neon figure on an acrylic backer
Two TheFace installers fitting 3D letters onto a shopping-centre facade

What we do in-house, and how

The workshop at 29 Olzhycha St — 200 m² under roof plus a 150 m² yard where the steel work is done. The engineer, the maker and the installer all work here, so a sign never changes hands between contractors.

  1. Engineering and cutting

    Our engineer breaks the sign into parts and works out the fixing points for that particular wall. Then it is cut and milled: acrylic, composite, PVC, metal.

  2. Metalwork and welding

    Frames, sub-structures, brackets and pylon bases are welded by us. That is what the yard is for: long steel cannot be turned indoors. The mitre cutting, the bending of returns and the fitting of joints happen there too.

  3. Printing and faces

    We print lightbox faces, banners, window film and vehicle graphics. A box face is removable, so a rebrand means reprinting it rather than building a new housing.

  4. Neon and lighting

    We bend and lay out 12 V flexible neon at the bench, on an acrylic backer or along the letter contours; we also work in classic glass. LED modules go in so the light falls evenly, then drivers are fitted and cable entries sealed.

  5. Assembly and a test switch-on

    The sign is assembled in full and lit in the workshop before it ships: we look at how evenly it glows, at the colours, at the animation modes. What goes to the facade has already been switched on.

  6. Installation by our own crew

    The same people who built it. Work at height, wiring, aligning letters on one baseline — the schedule and the result are ours to answer for, not a contractor’s.

TheFace in brief

Are you a manufacturer or a reseller?

A manufacturer. We design, cut, weld and assemble the signs ourselves in our own Kyiv workshop, and none of the making is subcontracted. The same crew that built the sign installs it, so the timeline and the result are on us, not on a contractor.

Where is your workshop?

In Kyiv, at 29 Olzhycha St: 200 m² under roof and a 150 m² open yard where the steel work is done. From here the crew travels to installs anywhere in Ukraine, and signs for Ukrainian businesses in Poland, Czechia and Germany ship from here too.

How many projects have you done?

2100 since 1996. We count projects, meaning addresses where our work stands, not individual signs: one facade often carries several. In 2023–2025 we delivered 50–70 projects a year, and 90% of our output is composite, 3D letters, neon.

Team

  • Yurii

    Founder & CEO

  • Maksym

    Software Solutions

  • Anton

    Marketing Director

  • Oleksii

    Head of Artwork & Layout

  • Andrii

    Non-Standard Solutions

    He works out how to build the things we haven’t built before. And when something on site doesn’t match the drawing, he is usually the one who finds the way round it.

  • Valentyn

    Neon Signs

    He picked up neon when we were only starting to move into it. Every neon sign we make now is his.

  • Volodymyr

    Installation Foreman

    He runs the crew on installs. The harder the structure, the more likely it is that he is the one on site.

  • Yurii

    Industrial Climber

    He works where the lift truck cannot get to: rope access, up high. The crew calls him the Beast.

Show us your facade

Tell us about your facade and what should go on it. We’ll tell you what will work there and what it costs.

We reply within a working hour. Free, no obligation.

By submitting this form you agree to our privacy policy — we’ll contact you about your request.

This form is checked by reCAPTCHA: Google’s privacy policy and terms of service apply.

+38 098 746 8778

Mon–Fri: 8:00–20:00, Sat–Sun: 10:00–18:00

We reply in English on Telegram, Viber and email.