Signs

Signs are all the exterior signage at your entrance: illuminated and non-illuminated, in metal, composite, acrylic and PVC. TheFace doesn't sell one type — we match it to your facade, then cut, weld and assemble it ourselves in our own Kyiv workshop at 29 Olzhycha St. Our own crew installs it anywhere in Ukraine, nothing subcontracted; a typical sign takes 5–14 working days and carries a one-year warranty.
METAL · ACRYLIC · LEDWhat we make
When someone needs 'a sign made', it's rarely clear yet which one: illuminated or not, metal or acrylic, one sign or a bracket and a window display on top. So we start not from a stock product but from your facade — which way it faces the sun and where your customers will see you from.
We match the type and material to that spot. Metal and composite hold up to Ukrainian weather for years, acrylic gives clean, even light, and PVC is the simpler option for a spot sheltered from the rain. Everything is made in our own workshop, so one team is responsible for the whole facade — from the idea to the install.
- Illuminated LED signs — your name glows evenly and reads day or night
- Non-illuminated signs in milled metal, composite or PVC for daytime facades
- End-wall (side) 'flag' signs — visible along the street from a distance
- A full facade set: sign, bracket and window display in one matching style
- Indoor signs and reception-area lettering inside the premises
- Reface or repair of an old sign without rebuilding the whole structure
- Neon signs and lightboxes — separate services; we'll say if they're the right fit
“Over our years of working together, The Face has made a great many signs and other advertising structures for our clinic network. We value not only the high quality and professional execution of every project, but also the ongoing support for structures already installed, their speed, and the team’s readiness to find the best solution.”Read the full reviewShow less
“On behalf of Astra Dent, I sincerely thank the team at The Face for many years of productive cooperation!
Over our years of working together, The Face has made a great many signs and other advertising structures for our clinic network. We value not only the high quality and professional execution of every project, but also the ongoing support for structures already installed, their speed, and the team’s readiness to find the best solution.
Reliability, responsibility and attention to detail matter especially to us — and these are exactly the qualities we invariably get from working with The Face. Thank you for a partnership we can rely on; we confidently recommend the company as an experienced and responsible manufacturer of advertising structures.”
What we need to price it
What happens next depends on whether you already have artwork.
You have artwork
Send it with a photo of the site — we’ll say what has to change in the construction, and price it.
No artwork yet
We start with a survey — from photos of the facade or on site. We’ll advise on format and construction. The visualization comes once you confirm the order.
The result is on us
First we come out for a site visit, survey and quote — we look at the facade, the dimensions and what needs approval. Once you confirm the order, we prepare a 3D visualization on a photo of your real facade, day and night, so you see the sign before it's built. Then we manufacture it in our own workshop: a typical sign takes 5–14 working days, a simple one less, a full-facade set longer. We install with our own crew, no subcontractors, and back it with a one-year warranty and service afterwards.
Key specifications
| Materials | Milled metal, aluminum composite, acrylic and PVC — combined to suit where the sign will hang. |
|---|---|
| Typical sizes | The facade sets the size: entrance width, mounting height and the distance the name should be legible from. |
| Lighting | LED modules in illuminated versions; non-illuminated signs work by day and under facade lighting at night. |
| Power | LEDs run off a 12 V power supply fed from 220 V mains; outdoor wiring is weatherproofed. |
| Mounting | Anchored to the wall, fascia or a frame, on standoffs where needed; installed by our own crew. |
| Placement | Facade, end wall of the building or interior; PVC goes only where rain can't reach it. |
| Lead time | A typical sign takes 5–14 working days. A full-facade set is quoted separately after the survey. |
| Warranty & service | One year on the structure and the install; after that — service: repairs and LED module swaps. |
Opening in Kyiv under a foreign brand
Americans call it a storefront sign, the British a shopfront or fascia sign. In Kyiv, four things shape it before anyone picks a material.
Your brand name keeps its spelling
Kyiv's sign rules (§ 2.6.3) require the text in Ukrainian, the state language. A trademark is the exception: it may appear in the language it is legally protected in. So a registered name in Latin letters stays as it is, and the rest of the text goes in Ukrainian.
The landlord comes before the city
In a shopping centre or any leased space, the landlord's brand book and technical requirements apply first, and the city's rules apply on top if the sign faces the street. Send us the landlord's requirements together with your own brand book.
The format zone decides what you can hang
Kyiv issues no sign permit, and since 24.09.2025 there has been nowhere to file a notice either. The rules still bind. The city is split into format zones 0–3: individual letters and bracket signs are allowed in all four, letters on a solid base only in zones 2 and 3, and a lightbox only in zone 3. We check the zone for your address before anything is built. Other cities have their own procedure.
Kyiv sign rules, step by stepA listed building needs one more sign-off
Listed buildings come with their own appearance requirements and usually a separate heritage-protection sign-off. We check that for your address as well.
What goes into the price of a sign
The price of a sign depends on the facade, size and material, so we don't publish a single price list. You get an exact figure fast, once we've measured.
Size and dimensions
A bigger sign means more material, fixings and hours on the install. We size the letter height to your facade width and the distance the sign has to be read from.
Materials
Metal, acrylic, composite and PVC differ in both price and lifespan. A metal sign runs higher than PVC but lasts longer; at the survey we recommend the material for your facade and weather, not for the price list.
Lighting and electrics
A non-illuminated sign costs less than a lit one: no LED modules, power supply or electrical work. Front-lit and halo-lit price separately too, and neon and lightboxes are our own offerings with their own pages.
Installation
Install cost comes down to height, how hard the access is, and the wall material — brick, plaster, composite or glass. A sign over the entrance and a structure up under the roof are very different amounts of crew work and equipment.
Approvals and permits
A rooftop structure counts as outdoor advertising, so it needs a permit and a fee for the spot. Blade signs over the pavement and stelae need approval in most cities. In Kyiv there is currently nowhere to file for a sign, but the rules on format zone, size and projection still apply. We'll tell you what has to be filed for your address and include it in the quote.
Layout complexity
A single word prices differently from a logo with fine detail, a set of plaques or a full floor of wayfinding. The 3D visualization on a photo of your facade comes after you confirm the order — so the look is agreed before manufacturing.
3D letters, neon and lightboxes take 5–14 working days to make; simple signs are quicker. The exact term is set in your quote.
What people ask before ordering
Not sure what to pick?
Illuminated or Non-Illuminated Sign: Which to Choose for Your Facade?
The short answer: it depends on when your customers see you. If most of your trade is in the evening and after dark, go illuminated. By day, a clean non-illuminated sign is often enough, and simpler to make.What to make a sign from: acrylic, metal, PVC or composite?
There's no single answer: the material depends on what you're making — a flat panel or dimensional letters, for outdoors or indoors. In short, PVC and composite go into panels and backers, while acrylic and metal go into letters, logos and the face of the sign.Lightbox or 3D letters: which fits your sign?
Short version: when you need maximum evening brightness and visibility from the road, go with a lightbox; when depth, daytime presence and brand character matter more, go with 3D letters. The final call comes down to your facade and type of business.
Work it out before you order
How tall do your sign letters need to be?
Enter the viewing distance and get the minimum and working cap height, plus how wide the line runs on your facade.CalculatorWhich sign fits your business?
Three questions about placement and illumination, and you see the construction type and our work in that category.Selector
Types of signs
Signs for cafes & restaurants
Illuminated signs, 3D letters and neon that set an inviting mood and draw guests in.Signs for beauty salons
Elegant illuminated signs and 3D letters that convey your salon's aesthetic.Signs for shops & retail
Eye-catching facade signs and lightboxes that stop passers-by at your window.Office & reception signs
Understated plaques, 3D logos and signs for offices and reception areas.Facade signs
The main sign above your entrance. People see it day and night.End-wall (blade) signs
A sign perpendicular to the facade, visible along the street from both directions.Non-illuminated signs
A clean sign with no lighting — in milled metal, acrylic or PVC.Illuminated signs
An LED-lit sign that reads brightly after dark.
What we make in the workshop
Show us your facade
Tell us about your facade and what should go on it. We’ll tell you what will work there and what it costs.
Mon–Fri: 8:00–20:00, Sat–Sun: 10:00–18:00
We reply in English on Telegram, Viber and email.






