Acrylites
An acrylite is a slim acrylic panel with even edge-lit LED illumination. We design and cut acrylites at our own bench, and install them across Ukraine with our own crew.
ACRYLIC · EDGE-LIT LEDWhat we make
An acrylite is a clear or coloured acrylic panel with an LED strip fitted into its edge. The light enters from the side and spreads evenly across the whole panel, so the lettering glows softly, with no bright spots or hotspots.
The thin profile and clean light give a restrained, tidy look. An acrylite sits well on the facade of a cafe, beauty salon, boutique or office, anywhere detail and neatness matter.
- Acrylites with your logo and brand name in your exact colours
- Clear panels with coloured or matte illumination
- Slim facade plates and entrance signs
- Interior panels for reception and waiting areas
- Acrylites for cafes and restaurants
- Acrylites for beauty salons and boutiques
What we need to price it
What happens next depends on whether you already have artwork.
You have artwork
Send it with a photo of the site — we’ll say what has to change in the construction, and price it.
No artwork yet
We start with a survey — from photos of the facade or on site. We’ll advise on format and construction. The visualization comes once you confirm the order.
Inside an acrylite
Hover or tap an item to highlight it on the diagram.
The result is on us
We start with an on-site survey and measurement, plus a quote. Once you confirm the order, we prepare a 3D visualization on your real facade — day and night — before anything goes into production. Then it moves to our Kyiv workshop: we cut the panel, finish the edge and run the LED into the profile along it, so the light spreads evenly across the face. A panel is ready in about a week, a complex shape later. Then our own crew installs it, and we service it afterwards. Work carries a one-year warranty, and service stays available after it.
Key specifications
| Materials | Cast acrylic, typically 6–10 mm, clear or coloured; aluminium base profile with an LED strip. |
|---|---|
| Typical sizes | From entrance plates to large facade panels; wide panels are lit from two or more edges. |
| Lighting | Edge-lit LED strip: warm or cool white, or a colour matched to your brand palette. |
| Power | 12 V via a compact power supply; outdoor panels get moisture-protected electrics. |
| Mounting | Standoff wall holders or ceiling suspensions; fitted by our own installation crew. |
| Service life | LEDs typically last around 50,000 hours; cast acrylic is UV-resistant. |
| Lead time | 5–14 working days. Complex shapes and large formats push it up. |
| Warranty & service | One year on the panel and installation; service support continues after that. |
What goes into the price of a sign
The price of a sign depends on the facade, size and material, so we don't publish a single price list. You get an exact figure fast, once we've measured.
Size and dimensions
A bigger sign means more material, fixings and hours on the install. We size the letter height to your facade width and the distance the sign has to be read from.
Materials
Metal, acrylic, composite and PVC differ in both price and lifespan. A metal sign runs higher than PVC but lasts longer; at the survey we recommend the material for your facade and weather, not for the price list.
Lighting and electrics
A non-illuminated sign costs less than a lit one: no LED modules, power supply or electrical work. Front-lit and halo-lit price separately too, and neon and lightboxes are our own offerings with their own pages.
Installation
Install cost comes down to height, how hard the access is, and the wall material — brick, plaster, composite or glass. A sign over the entrance and a structure up under the roof are very different amounts of crew work and equipment.
Approvals and permits
A rooftop structure counts as outdoor advertising, so it needs a permit and a fee for the spot. Blade signs over the pavement and stelae need approval in most cities. In Kyiv there is currently nowhere to file for a sign, but the rules on format zone, size and projection still apply. We'll tell you what has to be filed for your address and include it in the quote.
Layout complexity
A single word prices differently from a logo with fine detail, a set of plaques or a full floor of wayfinding. The 3D visualization on a photo of your facade comes after you confirm the order — so the look is agreed before manufacturing.
3D letters, neon and lightboxes take 5–14 working days to make; simple signs are quicker. The exact term is set in your quote.
What people ask before ordering
Not sure what to pick?
Illuminated or Non-Illuminated Sign: Which to Choose for Your Facade?
The short answer: it depends on when your customers see you. If most of your trade is in the evening and after dark, go illuminated. By day, a clean non-illuminated sign is often enough, and simpler to make.What to make a sign from: acrylic, metal, PVC or composite?
There's no single answer: the material depends on what you're making — a flat panel or dimensional letters, for outdoors or indoors. In short, PVC and composite go into panels and backers, while acrylic and metal go into letters, logos and the face of the sign.
What we make in the workshop
Show us your facade
Tell us about your facade and what should go on it. We’ll tell you what will work there and what it costs.
Mon–Fri: 8:00–20:00, Sat–Sun: 10:00–18:00
We reply in English on Telegram, Viber and email.