Rooftop Signs
A rooftop sign is a large-format, steel-framed sign with LED lighting, mounted on top of a building so it reads from a distance. We weld the steel frame ourselves and install across Ukraine with our own crew: from design through service.
STEEL FRAME · LEDWhat we make
A rooftop sign lifts your brand name above the city. It's visible across the street, from the highway, and from neighbouring buildings, where a facade sign no longer registers. It's a landmark for shopping and office centres, hotels, factories, and warehouses.
The base is a steel frame we engineer for wind load and weight. The letters or logo are lit by LED. We design each frame for the specific roof and parapet, so it stays secure and looks clean for years.
- Illuminated 3D rooftop letters — LED-lit, readable day and night
- Brand logo or mark on a steel frame above the building
- Large-format rooftop signs for shopping and office centres
- Parapet-mounted and roof-slope structures, built to your roof
- Non-illuminated rooftop lettering and marks when lighting isn't needed
- Rooftop signs for hotels, factories, and warehouses
What we need to price it
What happens next depends on whether you already have artwork.
You have artwork
Send it with a photo of the site — we’ll say what has to change in the construction, and price it.
No artwork yet
We start with a survey — from photos of the facade or on site. We’ll advise on format and construction. The visualization comes once you confirm the order.
The result is on us
We start with an on-site survey: we assess the roof, parapet, and anchor points, measure, and agree on the format. Once you confirm the order, we prepare a 3D visualization on your actual facade — day and night — before anything is manufactured. Then we weld the steel frame out in the workshop yard at 29 Olzhycha St and assemble the LED-lit elements inside. A mid-size build takes a week or two; a large rooftop structure takes more. Our own crew, with 30+ years of experience, installs it. You get a one-year warranty, and we keep servicing the structure afterwards.
Key specifications
| Materials | Steel frame with anti-corrosion coating, aluminium composite, acrylic, LED modules |
|---|---|
| Typical sizes | Set by viewing distance and the building's proportions; we agree the format after the survey |
| Lighting | LED modules with even face or halo illumination |
| Mounting | Anchored to the roof's load-bearing structure or parapet via engineered fixings; installed by our crew |
| Service life | LED modules typically last up to 50,000 hours; the frame far outlasts them with regular inspection |
| Lead time | A typical build takes 5–14 working days. A large rooftop structure takes longer, quoted after the survey. |
| Warranty & service | One-year warranty on the sign and installation; service continues after it ends |
| Permits | Rooftop placement usually requires approval from the local authorities; allow time for it |
What goes into the price of a sign
The price of a sign depends on the facade, size and material, so we don't publish a single price list. You get an exact figure fast, once we've measured.
Size and dimensions
A bigger sign means more material, fixings and hours on the install. We size the letter height to your facade width and the distance the sign has to be read from.
Materials
Metal, acrylic, composite and PVC differ in both price and lifespan. A metal sign runs higher than PVC but lasts longer; at the survey we recommend the material for your facade and weather, not for the price list.
Lighting and electrics
A non-illuminated sign costs less than a lit one: no LED modules, power supply or electrical work. Front-lit and halo-lit price separately too, and neon and lightboxes are our own offerings with their own pages.
Installation
Install cost comes down to height, how hard the access is, and the wall material — brick, plaster, composite or glass. A sign over the entrance and a structure up under the roof are very different amounts of crew work and equipment.
Approvals and permits
A rooftop structure counts as outdoor advertising, so it needs a permit and a fee for the spot. Blade signs over the pavement and stelae need approval in most cities. In Kyiv there is currently nowhere to file for a sign, but the rules on format zone, size and projection still apply. We'll tell you what has to be filed for your address and include it in the quote.
Layout complexity
A single word prices differently from a logo with fine detail, a set of plaques or a full floor of wayfinding. The 3D visualization on a photo of your facade comes after you confirm the order — so the look is agreed before manufacturing.
3D letters, neon and lightboxes take 5–14 working days to make; simple signs are quicker. The exact term is set in your quote.
What people ask before ordering
Not sure what to pick?
Illuminated or Non-Illuminated Sign: Which to Choose for Your Facade?
The short answer: it depends on when your customers see you. If most of your trade is in the evening and after dark, go illuminated. By day, a clean non-illuminated sign is often enough, and simpler to make.What to make a sign from: acrylic, metal, PVC or composite?
There's no single answer: the material depends on what you're making — a flat panel or dimensional letters, for outdoors or indoors. In short, PVC and composite go into panels and backers, while acrylic and metal go into letters, logos and the face of the sign.
What we make in the workshop
Show us your facade
Tell us about your facade and what should go on it. We’ll tell you what will work there and what it costs.
Mon–Fri: 8:00–20:00, Sat–Sun: 10:00–18:00
We reply in English on Telegram, Viber and email.