Facade Branding
Facade branding is when the building reads from the street as one whole, not a patchwork of signs and films from different contractors. TheFace across Ukraine designs the facade and entrance, makes them in composite, and installs it all with its own crew in one go.
COMPOSITE · TURNKEY
Facade Branding
A facade usually gets assembled over the years: one contractor put up the sign, another the window film, the canopy is a different color again, and the cables just run across the wall. From the street it reads as a collage. We pull it all into one system — shared color, typeface and proportions, with the cables hidden inside the frame.
The base is composite on a steel frame. It holds a flat, even surface with no waves or gaping seams, and we finish the entrance group — canopy, portal, wayfinding — in the same style. A standout sign, neon or a lightbox we build into the overall look as its own accent. And we don't work only at ground-floor level: higher up we go by lift or with rope-access climbers.
- Composite facade cladding on a steel frame — a flat surface with no waves or visible fixings
- Entrance group in one style: canopy, doorway portal, vestibule
- A sign, 3D letters and windows pulled into one color and typeface
- Exterior wayfinding: direction signs, door plaques, an opening-hours panel
- Concealed facade and entrance lighting — cables hidden inside the frame
- Rebranding an existing facade: we strip the old and update it to a new look
- Facade branding for shops, cafes, salons, pharmacies and office entrances
The result is on us
We start with a free site visit: we measure the facade, assess the wall's condition, the entrance group, the fixing points and the viewing angle from the street — and quote the work precisely, with no surprises in the estimate. Once you confirm the order, we pull everything into a 3D visualization on a photo of your real facade, day and night, so the colors, typeface and proportions are agreed before manufacturing. The cladding is made from composite on a steel frame, with the cables hidden inside. Our own crew of 10+ years' experience installs it — by lift or with rope access where needed, and in stages so your business keeps running. Simple facades we finish in a few working days, complex ones with an entrance group take longer. Everything carries a one-year warranty, with service after it too.
Key specifications
| Materials | Composite panels on a steel frame; window films, channel letters and lightboxes as the project calls for. |
|---|---|
| Typical sizes | From a single entrance group to a facade several floors tall; area and fixings are set at the survey. |
| Lighting | Concealed LED lighting for the facade and entrance; a sign, neon or lightbox serves as the lit accent. |
| Power | LED typically runs on 12 V; the power supplies are housed inside the frame. |
| Mounting | Steel frame anchored to the wall; fitted by our own crew — by lift or rope access when working at height. |
| Placement | Outdoors: facade, entrance group and window zone; we also install above the ground floor. |
| Lead time | Simple facades — a few working days; complex ones with an entrance group — longer. Exact dates at the survey. |
| Warranty & service | One year on the structure and the install; service stays available after the warranty ends. |
What goes into the price of a sign
The price of a sign depends on the facade, size and material, so we don't publish a single price list. The visit, measurement and quote are free, and you get an exact figure fast.
Size and dimensions
A bigger sign means more material, fixings and hours on the install. We size the letter height to your facade width and the distance the sign has to be read from.
Materials
Metal, acrylic, composite and PVC differ in both price and lifespan. A metal sign runs higher than PVC but lasts longer; at the survey we recommend the material for your facade and weather, not for the price list.
Lighting and electrics
A non-illuminated sign costs less than a lit one: no LED modules, power supply or electrical work. Front-lit and halo-lit price separately too, and neon and lightboxes are our own offerings with their own pages.
Installation
Install cost comes down to height, how hard the access is, and the wall material — brick, plaster, composite or glass. A sign over the entrance and a structure up under the roof are very different amounts of crew work and equipment.
Approvals and permits
Some builds — blade signs over the pavement, rooftop signs, stelae on a site — need a placement approval. Where that applies, we tell you what to file and fold it into the quote.
Layout complexity
A single word prices differently from a logo with fine detail, a set of plaques or a full floor of wayfinding. The visit, measurement and quote are free, and the 3D visualization on a photo of your facade comes after you confirm the order — so the look is agreed before manufacturing.
Simple signs are ready in a few working days, more complex structures take longer. The exact term is set in your quote.
Frequently asked questions
Not sure what to pick?
What to make a sign from: acrylic, metal, PVC or composite?
There's no single answer: the material depends on what you're making — a flat panel or dimensional letters, for outdoors or indoors. In short, PVC and composite go into panels and backers, while acrylic and metal go into letters, logos and the face of the sign.
Read the comparisonIlluminated or Non-Illuminated Sign: Which to Choose for Your Facade?
The short answer: it depends on when your customers see you. If most of your trade is in the evening and after dark, go illuminated. By day, a clean non-illuminated sign is often enough, and simpler to make.
Read the comparisonThe full outdoor-advertising cycle
Ready to discuss your project?
Tell us about the task — we’ll quote for free and suggest a solution.