3D Logos

A 3D logo is a dimensional, physical version of your brand mark for a facade, reception wall or interior. We build it at our own shop and install it across Ukraine with our own crew — from a brand-book-accurate design through to installation.
ACRYLIC · METAL · LEDWhat we make
A 3D logo lifts your mark off the page and into real material — acrylic or metal, lit with LED or not. It holds your exact colors, proportions and typeface as set out in your brand book.
It suits offices, showrooms, shops and cafes, anywhere the logo should greet people at the door or sit behind a counter. By day it reads on its depth; after dark, a lit mark stays just as clear.
- Logos for building facades and above entrances
- Marks for reception walls and behind the front desk
- Interior logos for offices, showrooms and waiting areas
- Acrylic 3D logos — smooth faces with clean edges
- Metal logos in brushed or painted finishes
- LED-lit logos: halo (backlit), face-lit or edge-lit
What we need to price it
What happens next depends on whether you already have artwork.
You have artwork
Send it with a photo of the site — we’ll say what has to change in the construction, and price it.
No artwork yet
We start with a survey — from photos of the facade or on site. We’ll advise on format and construction. The visualization comes once you confirm the order.
Inside a 3D logo
Hover or tap an item to highlight it on the diagram.
The result is on us
We start with an on-site survey and measurement, then a quote priced to your mark. Once you confirm the order, we show a 3D visualization of the logo on your actual facade, day and night, so you see the result before anything is made. We build to your brand book, matching acrylic or metal and the LED lighting type to the mark. From there it is the full cycle in our workshop at 29 Olzhycha St: we cut the mark's contour, weld or bend the returns, build the body and run the LED. That runs a week or two, after which our own crew fits it. Every job carries a one-year warranty, with support continuing after it.
Key specifications
| Materials | Acrylic and metal (stainless steel, aluminum); painted to match your exact brand colors |
|---|---|
| Typical sizes | From compact reception marks to facade logos several meters wide; the wall and viewing distance set the size |
| Lighting | LED: face-lit, halo (a glow on the wall behind the mark) or edge-lit; unlit versions are an option |
| Power | Typically 12 V via a power supply hidden behind the mark or indoors; connects to 220 V mains |
| Mounting | Standoffs, studs or flush to the wall; our own crew mounts on facades, reception walls and drywall |
| Placement | Facades, entrances, reception walls and interiors; outdoor marks get a weather-sealed build |
| Lead time | 5–14 working days. A large lit facade mark needs the upper end of that. |
| Warranty & service | One year on the product and installation; we keep servicing the mark after the warranty ends |
An international logo on a Kyiv wall
A mark from abroad raises two questions a local one doesn't: language and paperwork.
A Latin-script mark can stay as it is
Kyiv's sign rules allow a trademark in the language it is protected in. If you add a line about what you do, that line goes in Ukrainian.
Keep the trademark document on file
If the logo is your trademark, keep a copy of the document that lets you use it; only you can provide it. Together with your title or lease and our drawing, it shows the sign complies when Kyiv's inspectors check the facade. There has been nowhere in Kyiv to file these papers in advance since 24.09.2025. Other cities have their own procedure.
Lit marks in Warsaw and Barcelona
Our logos are up outside Ukraine too: an illuminated disc logo over a clinic entrance in Warsaw, and a halo-lit logo with lettering in a wall recess in Barcelona. For Ukrainian businesses in Poland, Czechia and Germany, we build in Kyiv and ship, and our own crew from Ukraine or a vetted local installer fits the mark.
Signs for Ukrainian businesses in the EU
What goes into the price of a sign
The price of a sign depends on the facade, size and material, so we don't publish a single price list. You get an exact figure fast, once we've measured.
Size and dimensions
A bigger sign means more material, fixings and hours on the install. We size the letter height to your facade width and the distance the sign has to be read from.
Materials
Metal, acrylic, composite and PVC differ in both price and lifespan. A metal sign runs higher than PVC but lasts longer; at the survey we recommend the material for your facade and weather, not for the price list.
Lighting and electrics
A non-illuminated sign costs less than a lit one: no LED modules, power supply or electrical work. Front-lit and halo-lit price separately too, and neon and lightboxes are our own offerings with their own pages.
Installation
Install cost comes down to height, how hard the access is, and the wall material — brick, plaster, composite or glass. A sign over the entrance and a structure up under the roof are very different amounts of crew work and equipment.
Approvals and permits
A rooftop structure counts as outdoor advertising, so it needs a permit and a fee for the spot. Blade signs over the pavement and stelae need approval in most cities. In Kyiv there is currently nowhere to file for a sign, but the rules on format zone, size and projection still apply. We'll tell you what has to be filed for your address and include it in the quote.
Layout complexity
A single word prices differently from a logo with fine detail, a set of plaques or a full floor of wayfinding. The 3D visualization on a photo of your facade comes after you confirm the order — so the look is agreed before manufacturing.
3D letters, neon and lightboxes take 5–14 working days to make; simple signs are quicker. The exact term is set in your quote.
What people ask before ordering
Not sure what to pick?
Lightbox or 3D letters: which fits your sign?
Short version: when you need maximum evening brightness and visibility from the road, go with a lightbox; when depth, daytime presence and brand character matter more, go with 3D letters. The final call comes down to your facade and type of business.What to make a sign from: acrylic, metal, PVC or composite?
There's no single answer: the material depends on what you're making — a flat panel or dimensional letters, for outdoors or indoors. In short, PVC and composite go into panels and backers, while acrylic and metal go into letters, logos and the face of the sign.
What we make in the workshop
Show us your facade
Tell us about your facade and what should go on it. We’ll tell you what will work there and what it costs.
Mon–Fri: 8:00–20:00, Sat–Sun: 10:00–18:00
We reply in English on Telegram, Viber and email.




